Temperature

Dual Sensor Y-Cable-Temperature and Skin Resistance
MC-6SY

This cable contains two Sensors and a Y-connector.
Temperature is detected by a thermistor taped to the skin. 

 

Q. Can J&J make a special Y-Cable with 2 Temps, or with 2 SCs?
A. No.  On the C2+ the SR channels are optimized at 1 uA while the Temperature channels are optimized at  50 uA.  This configuration was chosen based on mathematic models and laboratory tests showing that maximum sensitivity and absolute minimum noise is achieved independently . This mandated a 50 times differences in uA.sensitiviy between the 2 signal types.
What this means on a practical side is that no dual-signal or signal-switching  special cables are possible at this time.

Fahrenheit-Centigrade Button

The toggle button switches the display units between Fahrenheit and Centigrade.  The setting you are using when you exit a session is saved until you manually change it.

Skin Temperature Feedback

Skin Temperature is a sensitive measure signaling small changes in peripheral blood flow which trigger successful feedback.

AuotThreshold is on: The feedback threshold is automatically adjusted every 0.5 seconds. You do not need to adjust this threshold.

ABOVE T./ BELOW T. : 
Below T.: A tone will signal successful feedback whenever the signal drops below the last threshold value for 0.5 sec.
To change this, toggle to Above T.
Above T.: A tone will now signal successful feedback whenever the signal rises above the last threshold value for 0.5 sec. 

TYPE OF FEEDBACK: This type of feedback is Differential Signal Feedback. It provides information about differential or change-based aspects of the signal, not the absolute value of the signal.