The screen button which is highlighted shows the name of the current screen being displayed. Most of the top buttons have pull down menus (as shown above) of alternate screen choices.
Clicking on the down arrow next to the screen name activates this pull down menu.
Whenever you select a screen from the pull down menu, it is assigned to the top menu button.  This ensures that your favorite screen in each menu group will be only one click away.  On slower computers, click on the drop-down arrow and hold it down while mousing over the drop-down menu area, if the drop-down menu doesn’t at first appear.

TOP TOOLBAR - Screen Select +Dual Screens

Each Application has a master screen, 'Run Manaul Session.' The master screen allows you to view all signals live, and select those signals you want the client to view on their screen, on a second monitor.

With our dual display mode, you can connect a second monitor to display a signal screen and a feedback screen at the same time.

The first 4 Tabs on the Screen Selection Toolbar are  found on all applications.
ALWAYS SETUP AN APPLICATION on each TAB, from LEFT-to-RIGHT.
When you start an application, it opens the WELCOME Screen.
The WELCOME SCREEN asks to check impedance.

The Check Signals Screen asks to check signal waveforms.

Next select a protocol on the SELECT PROTOCOL Screen.

Select a Task from the SELECT TASK Screen.
The Task Buttons launch other screens.... Like those shown to the left.

The Screens under these Tabs are used for feedback.
Each Tab is like a folder. Simililar Screens are held underneath a Tab.
For example: all EMG Screens are under one Tab, while all Game/Mosiac-Fill Screens are under another Tab.
Tabs help the user stay within a feedback family. If doinf EMG, and you want to try a different screen, click in the down-arrow and choose an alternative EMG screen without confusing the client about which signal is active for feedback.
Remember that the Task Buttons launch other screens.... Like those shown to the left.

Some Tabs have special functions.
The Quickguide tab is an off-line manual.
About J&J is a screen to contact us.
Occasionally you will find a 'DEMO' screen - these screens are meant for training professionals in audiences. They show how the Control Panel fine-turns the feedback signals - all on one screen for easier comprehension..

SCREENS : PART I:
FOUR-SCREEN APPLICATION SET-UP SEQUENCE:
How to get up and running

SCREENS : PART II:
FEEDBACK SCREENS ON MAIN MONITOR:
Signals Grouped by Tabs

SCREENS : PART III:
FEEDBACK REVIEW SCREENS ON MAIN MONITOR:
Additional Help and Summary and Demo Screens

SCREENS : PART IV:
CLIENT-ONLY FEEDBACK SCREENS ON SECOND MONITOR:
Select by pop-up window, not tabs

Selecting the 'dual Screen' Sidebar Icon pops -up a new window.

Only use these screens if you had previously set up both Physiolab AND USE3 for extended monitor mode.
[ If you do not, and you select ['apply'] a dual screen, it will write on top of your single monitor and corrupt you viewing. You must exit completely and restart.]

SCREENS : PART V:
TABBED SCREENS ARE LINKED TO CLIENT-ONLY FEEDBACK SCREENS ON SECOND MONITOR:
So try to configure in Extended Monitor mode..

Most Feedback Tabs are automatically linked to a dual screen. This allows you the choice of using either one screen or the master-dual screen options 'on the fly'. The key to doing it this way is to pre-configure your computer to run in extended screen dual screen mode.
For those challenged by extended monitor mode, forget about it. These programs work just fine without it.

The top Screen Select Tool bar lists all of the available display screens in an application.  Use this tool bar to select a specific display screen.

DOWN-ARROW: The screen button which is highlighted shows the name of the current screen being displayed. Most of the top buttons have pull down menus (as shown above) of alternate screen choices. Clicking on the down arrow next to the screen name activates this pull down menu. Whenever you select a screen from the pull down menu, it is assigned to the top menu button.  This ensures that your favorite screen in each menu group will be only one click away. On slower computers, click on the drop-down arrow and hold it down while mousing over the drop-down menu area, if the drop-down menu doesn’t at first appear.

DOWN-ARROW shows additional screens...