SELECT SECOND SCREEN ICON
Sounds and Speaker On/Off are different: just click on them to activate/de-activate.
Use the left edge Signal Control Tool bar buttons to change sound settings characteristics.
These buttons will modify only one sound at a time.
Press MediaPlayer
Setting Up Windows Media Player Feedback
NOTE: Media Player for J&J appears stable in XP and Win 7 SP1. It is not stable in Vista. Some users can run Media Player, while others - with many Vista machines- can bring up Media Player for Vista, but it will not play. We recommend Win 7.
To set up Media Player feedback:
* first enable (check) the signal you wish to set up
* click on the signal name to highlight it
* make your threshold choice in the drop down box.
* click the Media Player button
* close the window.
The Windows Media Player opens.
SELECT VIDEO OR SOUND DIRECTLY FROM MEDIA PLAYER WINDOW,.
Next click Open at the top of the Media Player window.
* The top drop-down box in the “Open” window defaults to the Physiolab Media Player folder. Click on a file name to select it , then click Open.
* You can add your own audio and video files to the C:\Program Files\J&J Engineering\Physiolab\Media Player folder or you can use the top drop-down arrow box in the Open window to browse to the location of any audio or video file that you wish to play either on your hard drive or on a CD in your CD-ROM drive. Music files are normally stored in the folder My Documents\My Music. In the “Open” window drop-down box you may have to go up several folder levels to get to your CD-ROM drive or music file folders.
If you are playing a music file in Media Player, the background visualization will default to the settings from the last time you used Media Player.
Media Player Troubleshooting
STOPS WORKING PROPERLY: Changes to the Select Sound window in Physiolab may deselect the play file in Media Player. It will no longer operate properly.
* Click Open in the Media Player window and re-select the audio or video file.
If your Media Player window does not appear to be functioning (clicking on Open does not work to select a file OR the screen appears frozen while a file is playing), click on MBP Media Player in the bottom task bar to make sure Media Player is selected as an active window.
If Media Player is running, you are getting no sound, and the Media Player window says “Paused” in the lower left-hand corner, then check the following:
1. Make sure the Sound ON/OFF speaker button is pressed.
2. Open the Select Sounds window with the Select Sound button . Make sure that Media Player is listed as the sound type for the signal you are expecting. If not, see the section above on setting up Windows Media Player feedback.
NO SOUND: If Media Player is running, you are getting no sound, and the Media Player window says “Playing” in the lower-left hand corner, then check the following:
1. Windows Speaker volume controls in Start>Control Panel>Sounds
2. External Speaker connections to the computer and to the power outlet
3. Check that the particular .wmv video does indeed have audio.
Media Player feedback controls are found under the SOUNDS button window in PHYSIOLAB. To find MEDIA PLAYER first click on a signal, then find and open the Sounds button. If there is no button, sounds are not enabled on that screen. If the Sound Window opens, check aMedia Player Then view the other options, like above or below threshold, and sound type. Then enalbe the Speaker button to enable.
NOTE: If you select a sound and it works, then you select another sound and the sounds stop, even though both are checked, you have saturated the amlifiers and must restart. The long term solution is to install USB sound speakers. The do not saturate the amplifiers.
SIDEBAR
DUAL SCREEN MEDIA PLAYER
Use Dual Button to select Media Player for Dual Screen!
If you are running single display mode, Media Player will be minimized in the task bar. It may not be visible until the connected signal crosses the threshold. Click on Media Player in the task bar to bring up the Media Player window.
If you are running dual display mode, next click the Select Second Screen Icon, then highlight media player in the Screen list and click Apply.
SELECT THE SOUND ICON ABOVE THE ‘SPEAKER’ ICON.
BRING UP MEDIA PLAYER SOUND [AND VIDEO]
SELECT HOW THE EVENT IS CONTROLLED
ACTIVATE MEDIA PLAYER SOUND [AND VIDEO]
Highlight Media Player and Apply.
Media Player is active, but no media [.wmv] file is selected..
SIDEBAR: MBP MEDIA PLAYER - it is different from native windows Media Player
Continous
Continous
Continous
Continous
Continous
MediaPlayer
þ Play ABOVE Th
FIRST, MAKE THE MEDIA PLAYER SOUND ACTIVE
NEXT, MAKE THE MEDIA PLAYER SCREEN ACTIVE
EXAMPLE SIGNAL + THRESHOLD
Play ABOVE Th
Play ABOVE Th
Play ABOVE Th
Play ABOVE Th
TURN ON SPEAKER
NOW, MEDIA PLAYER SCREEN WILL PLAY AND PAUSE
ABOVE AND BELOW THRESHOLD
